Description
MX Sensor 433 315MHZ TPMS Sensor Tire Repair Tools Scanner MaxiTPMS Pad Tire Pressure Monitor Tester Programming MX-Sensor
⇐More Details: Please Drop a Massage⇒
Steps for the installation Process:
Step 01: Loose the tire: Remove the valve cap and core and deflate the tire.
Step 02: Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
Step 03: Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
Step 04: Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
Step 05: Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Specifications:
Battery Life: ≥5 years
Operating Temperature :40°C to +125°C
Storage Temperature :40°C to +150°C
Operating Humidity: 90%
Operating Frequency :433 MHz/315MHz
Pressure Monitoring Range :100 to 900 kPa
Pressure Reading Accuracy :±10 kPa
Temperature Reading Range :40°C to +125°C
Temperature Reading Accuracy: ±5°C
G Sensor Reading Accuracy :±15%
Transmission Power: 5-8 dBm
Battery: 3.0 V
Dimensions :(W x H x D) 55.1 mm x 29.4 mm x 21.8 mm (Clamp-in Sensor)
Weight :(Without Valve) 18.5 g (Clamp-in Sensor)
Reviews
There are no reviews yet.